Divator DP1 Surface Supply
The DIVATOR DP1 surface supply hose provides a truly light weight and portable surface supply. The DP1 provide full cylinder pressure to the diver at depth. By providing cylinder air pressure to the diver, the supply hose is equipped with a regulator at the diver’s end that automatically compensates the secondary pressure for depth variations, thereby eliminating the need for adjustment of the dive panel by the surface attendant. The supply hose is also approved in accordance with requirements for lifelines and can therefore act as a safety lifeline.
- No need for manual adjustment of pressure for various depths which relieves the attendant's work load.
- The surface supply is simplified so that the attendant can focus on the safety of the diver.
- The light and compact design allows rapid deployment when operating in remote or difficult terrain.
- The small diameter of the lightweight supply hose greatly reduces resistance in current waters.
- The supply hose serves as safety life line as well as air hose.
DIVATOR DP1 features a unique patented supply hose solution and a surface supply dive control panel enabling rapid deployment in remote locations. DP1 is a surface supply dive system with a operating pressure of up to 300 bar / 4350 psi to the diver.
The supply hose itself is very strong but lightweight. At only 10 mm (0.39 inch) in diameter, 60 meters (200 feet) of hose weighs less than 5 kilos (11 lbs) resulting in less storage space, lower carry weight and far less drag in swift water. The supply hose is also approved in accordance with requirements for lifelines and can therefore act as a safety lifeline.
DIVATOR DP1 has two high-pressure connections, each to be connected to a high pressure supply cylinder or cylinder package. A shuttle valve makes it possible to change supply cylinder or cylinder package during the diving operation. The shuttle valve also includes a back pressure valve for the supply hose.
All DIVATOR regulators, such as the DIVATOR MKII and MKIII can be used in conjunction as a bailout apparatus. A DIVATOR MKII "BAIL OUT" regulator is available. This Bail out regulator is intended to be used when a direct warning of the surface supply failure is needed, so that full cylinders are available for decompression and/or extended time ascent.
96745-12 Divator Hose Winding Frame short
336950317 Holdall, DP1 airline hose With winding posts
30030-51 T-Piece, straight DP1, SpiroGuide
30102-01 DP1 2:nd Diver take out kit
97373-51 Pressure Relief Handle DP1 Surface Supply, male IS
97335-51 Sign Open
336921843 Carabina hook 120 mm Stainless steel 316
96741-51 Safety belt DP1
30977-01 Divator Equipment Box
30798-01 DP 1 Transport box
30798-02 DP 1 Transport box over 70m
97033-01 Divator DP1 60m (197ft) w Surface Panel unit
96710-51 Divator DP1 Surface Panel kit Bar
96710-53 Divator DP1 Surface Panel kit psi
96725-01 DP1 Supply Hose 60m, 200ft with MKII P+ Regulator
96725-02 DP1 Supply Hose 70m, 230ft with MKII P+ Regulator
96725-03 DP1 Supply Hose 30m, 98ft with MKII P+ Regulator
96725-04 DP1 Supply Hose 120m,394ft with MKII P+ Regulator
96725-05 DP1 Supply Hose 10m, 33ft with MKII P+ Regulator
96725-06 DP1 Supply Hose 90m, 295ft with MKII P+ Regulator
96725-07 DP1 Supply Hose 80m, 266ft with MKII P+ Regulator
96725-08 DP1 Supply Hose 230ft, 70m with com.cable & sleeve, P+ Reg
96725-09 DP1 Supply Hose, 98ft, 30m with com.cable & sleeve, P+ Reg
96725-10 DP1 Supply Hose, 200ft,60m with com.cable & sleeve, P+ Reg
Επιστροφή στην κατηγορία